Headlight lens restoration process

Instructions step by step

Step 1

Before

Headlights clouded and yellowed.

Step 2

Clean

Clean with SprayMax 1K Solvent wash 36800090

to the product

Step 3

Sanding

Begin dry sanding with P180 grit abrasive. Sand with progressively finer grades through P320, P500, and P800. Apply then dry 3680094 Wax & Grease Remover between grades to eliminate dust.

Step 4

Intermediate cleaning

Clean and dry between each stage of sanding with SprayMax 3680094 1K Wax & Grease Remover. Finish by wet sanding with P1000 and P2000.

to the product

Step 5

Final cleaning

Final cleaning with dust cloth.

Step 6

Activate 2K 2in1 Headlight clear

Acitvate 2K.

Step 7

Apply 2k clear coat

After complete drying, apply 2in1 SprayMax 2K Headlight Clearcoat.

to the product

Step 8

Drying

Drying above 20°C / 68°F overnight or accelerate with an IR lamp.

Step 9

After

Headlight lens clear again.

Process instructions

Download

Surface Preparation

Rich in active ingredients for the efficient removal of silicone, grease, oil, wax, dirt, tar, and soot. This high quality product has excellent ...

Clear Coats and Spot Blender

SprayMax® Special 2K Clear Coat is a protective coating for polycarbonate lenses suitable for fixing scratches, yellowness or foggy headlights. ...

Contact

Europe

North America

International

Headlight lens restoration process

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

The SprayMax products used at a glance:

1K Solvent Wash

2K 2in1 Headlight Clear

Contact